A SERVICE OF

logo

Determine Power Source 17
E-EQ-RX2OGWW-B RX2 User’s Guide
7. Locate a second terminal block near the RX2. Connect this terminal block to the customer
supplied cable.
8. Use the Power Cable and the instructions in “Vehicle 12VDC Direct Power Connection”,
earlier in this section, to connect the RX2 to the terminal block.
9. Turn the Power Supply on. The ON LED on the Power Supply illuminates when it is
receiving power from the vehicle.
10. Turn the RX2 On.
11. The status LED on the RX2 lights solid green while the RX2 is booting, then switches to
flashing green after the RX2 has finished booting.