A SERVICE OF

logo

Determine Power Source 15
E-EQ-RX2OGWW-B RX2 User’s Guide
Vehicle Cradle 24/72VDC Input Cable Connection
Caution
For proper and safe installation, the input power cable must be connected to a
fused circuit on the vehicle. This fused circuit requires a 5 Amp maximum time
delay (slow blow) fuse. If the supply connection is made directly to the battery,
the fuse should be installed in the positive lead within 5 inches of the battery
positive (+) terminal.
1. Power Switch
2. Power On Indicator
3. Output to RX2
4. Input from Vehicle Battery
Figure 13 Vehicle Power Supply, 24 - 72VDC (Fuse Not Shown)
WHITE - Power Out
BLACK - Return
GREEN - Chassis Ground
WHITE
GREEN
TO VEHICLE
TERMINAL BLOCK
Figure 14 Connecting the Power Supply to the Vehicle
3.5”
8.75”
9.25”
4.7”
Figure 15 Power Supply Mounting Template (Not to Scale)
1. Make sure the RX2 power switch is in the Off position.
2. Turn the Power Supply toggle switch to the Off position.