43
Chapter 3: Menus
Job Buffer Size Disabled*
10…100%
If you have an optional disk installed in your printer, you can allocate a portion of the available
disk space for spooling jobs. You can choose any 1% increment between 10 and 100%. You
must select a Job Buffer Size before you can set the Job Buffer menu to On for a particular
port.
Warning:
If you change the job buffer size, the printer formats the hard disk, and all resources
stored on the disk are deleted.
The Job Buffer Size menu item is only displayed if the installed disk option is formatted and is
not defective or Read/Write or Write protected.
Job Accounting Off*
On
If you have an optional disk installed in your printer, set Job Accounting On to use the disk to
store statistical information about your printer’s most recent jobs. The statistics include
whether the job printed with or without errors, time required to print the job, size (in bytes) of
the job, requested paper size and paper type, color settings used, total number of printed
pages, and the number of copies requested.
To print a listing of all accumulated statistics, select Print from the Job Acct Stat menu item in
the Utilities Menu.
The Job Accounting menu item is not displayed if the installed disk option is defective or
Read/Write or Write protected, or if the Job Buffer Size menu item is set to 100%.
Job Acct Limit Disabled
10…1000*
If you have an optional disk installed in your printer, you can use the disk to store statistical
information about a specified number of jobs. The value you select from the Job Acct Limit
menu item determines the number of jobs for which statistics are stored. Once you reach the
job limit, statistics for the oldest job are deleted as new statistics are stored, maintaining
statistics for the specified number of jobs.
If you select Disabled, the only limit to the number of jobs for which statistics are stored is the
memory available on the disk.
Warning:
When you change the Job Acct Limit value, all statistical information stored on the
disk is discarded.
The Job Acct Limit menu item is not displayed if the installed disk option is defective or Read/
Write or Write protected, or if the Job Buffer Size menu item is set to 100%.
Setup Menu (continued)
Menu item Values
*Factory default
