A SERVICE OF

logo

100 Service Manual
4039-1XX
Duplex Option System Card And Motor Removal
1. Disconnect all cables.
2. Release latches [
A
] and lift the system board out.
3. Remove the two motor mounting screws [
B
].
4. Lift the motor out of the frame assembly.
Note:
The remaining FRU is the Gearblock Assembly. When you
replace this FRU
see
“Lubrication Specifications” on page 120”.
Note:
Reinstall the motor so the belt is not tight but will not jump
teeth on the timing pulley.
A
B