5: Commands and Levels
XPort Pro Command Reference 54
connections to other devices.
Restores the default reconnect time value for connect
mode tunneling.
Defaults the connect mode start character.
Sets an email profile to use to send an email alert upon
establishing
a connect mode tunnel.
<number> = the number of the email profile to use.
email disconnect <number>
Sets an email profile to use to send an email alert upon
closing
a connect mode tunnel.
<number> = the number of the email profile to use.
Returns to the tunnel level.
Characters already in the serial data buffer are retained
upon establishing
a connect mode tunneling connection.
Flushes the serial data buffer upon establishing a connect
mode tunneling
flush start character disable Enables forwarding of the connect start character into the
flush start character enable
Disables forwarding of the connect start character into the
network.
Enters the next lower level.
Specify the instance for the next lower level.
Connects to the first host in the list that accepts the con-
nection.
host mode simultaneous Selects simultaneous connections to all hosts on the host
Disconnects the active connect mode tunneling connection
or connections.
Sets a specific port for use as the local port.
<number> = the number of the port to use.
no email connect Discontinues sending email alerts upon establishing a
Discontinues sending email alerts upon closing a connect
mode tunnel.
Promotes the identified host, exchanging it place with the
host above it,
to adjust the order of the defined hosts.
reconnect time <milliseconds>
Sets the reconnect time value for tunneling connections
established by the
device in milliseconds.
<milliseconds> = timeout in milliseconds.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays tunnel connect status.
start character <control>
Sets the connect mode start character.
The character may be input as text, control, decimal, or
hex.
A control character has the form <control>C.
A decimal value character has the form \99.
A hex value character has the form 0xFF.
