5: Commands and Levels
XPort Pro Command Reference 113
Displays Certificate Information.
Displays Authority Certificate Information.
Displays the last 20 commands entered during the current
CLI session.
Stores the current configuration in permanent memory.
syslog (config-syslog) level commands
Restores the default syslog local port.
Restores the default syslog remote port.
default severity log level
Returns to the config level.
Sets the address of the syslog recipient.
<text> = IP address or name of the host.
Sets the syslog local port.
<number> = number of the local port used when making a
syslog connection.
Removes the address of the syslog recipient.
Sets the syslog remote port.
<number
> = number of the remote port used when making
a syslog connection.
Log only Alert and more severe events.
severity log level critical
Log only Critical and more severe events.
severity log level emergency
Log only Emergency events.
Log only Error and more severe events.
severity log level information
Log only Information and more severe events.
severity log level notice
Log only Notice and more severe events.
severity log level warning
Log only Warning and more severe events.
Displays the current configuration.
Displays the last 20 commands entered during the current
CLI session.
Displays the syslog statistics.
Stores the current configuration in permanent memory.
tcp (config-tcp) level commands
Sets the number of packets that must be received before
an ACK is forced.
If there is a large amount of data to acknowledge, an ACK
will be forced
Continuously shows TCP statistics
Restores the default ack limit of 3 packets.
Restores the default Maximum Retransmissions.
default max retrans syn ack
Restores the default Maximum Retransmissions for
SYN/ACK.
