37
6
DSC OPERATION
New2001
6
■ DSC Set mode
DD
Add Individual ID/Group ID (See pgs. 16, 17)
DD
Delete Individual ID/Group ID (See p. 17)
DD
MMSI Code Check
The programmed 9-digit MMSI (DSC self ID) code can be
checked in DSC Set mode.
q Enter “
MMMMSSII CChheecckk
” in DSC Set up menu.
w Check the 9-digit MMSI (DSC self ID) code.
e Push [CLR] to exit the condition to DSC set up menu.
r Push [CLR] or rotate [SELECTOR] to select “
EExxiitt
,”
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
DD
Automatic Acknowledgement
This item sets the automatic acknowledgement function to
ON or OFF.
When a position request, position report or polling request call
is received, the transceiver automatically transmits a position
request reply, position report reply or polling reply call, re-
spectively.
q Enter “
AAuuttoo AACCKK
” in DSC menu.
w Rotate [SELECTOR] to turn the automatic acknowledge-
ment function ON or OFF
.
e Push [ENT] to set and to exit the condition to DSC set up
menu.
r Push [CLR] or rotate [SELECTOR] to select “
EExxiitt
,”
push [ENT] to return to the DSC menu.
• Repeat again to return to the normal operation condition.
--DSC Menu--
Auto ACK
ON
˘OFF
<CLR˘Exit / ENT˘OK>
DDSSCC MMeennuu
➪
SSeett uupp
➪
AAuuttoo AACCKK
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
--DSC Menu--
MMSI Check
123456789
<CLR˘Exit>
DDSSCC MMeennuu
➪
SSeett uupp
➪
MMMMSSII CChheecckk
(Push [MENU]) (Rotate [SELECTOR], then push [ENT].)
!IC-M603.qxd 06.7.28 1:46 PM Page 37 (1,1)
