Performing Cross-OS File Exchange Operations 5-23
Hitachi USP V Cross-OS File Exchange User’s Guide
Creating FCU Parameter Definition Files (Windows)
To create an FCU parameter definition file using the FCU GUI for Windows
2000/2003/Windows NT systems:
1. Start the FCU GUI for Windows 2000/2003/Windows NT systems (see section
Starting the FCU GUI). If you start FCU from the DOS prompt, enter fcu (do
not specify the -nc or param option).
2. When the FCU main panel opens, the title bar should display Untitled to
indicate that a new parameter definition file is open. If a file name is
displayed instead of Untitled, use the File-New command (
) to open a
new parameter definition file.
3. If you plan to perform FX operations while you are creating the FCU
parameter definition file, open the Volume information panel (select View-
Volume information…), and make sure that the desired FX volume(s)
is/are available. If not, FCU will not be able to perform FX operations, but you
can still create a new parameter definition file.
