5-22 Performing Cross-Os File Exchange Operations
Hitachi USP V Cross-OS File Exchange User’s Guide
13. FCU does not load the next operation automatically. To perform another FX
operation, select the desired Parameter-Load command, and repeat steps
(8) through (12). To exit FCU, select the File-Exit command.
Note: After an FXotm file transfer from Windows 2000/2003/Windows NT
systems, there will be a delay before you can access the FX volume. The
length of delay varies according to individual server performance.
Note: After you expand open volumes (LUSE), you will need to reboot
Windows 2000/2003/Windows NT systems.
Note: Do not use the open system host to access an FX volume. Use only FAL
to access FX volumes. This applies to PC server platforms (e.g., NT) and UNIX-
based systems.
Figure 5-7 Execute Panel Showing Normal End
Figure 5-8 Execute Panel Showing Canceled Operation
Figure 5-9 Execute Panel Showing Error End
The Cancel button changes to Close
after the operation is complete.
The Cancel button changes to Close
after the operation is canceled.
The Cancel button changes to Close
after the operation ends abnormally.
