Version 1.2 Page 36 4/22/04
In either case, you need to provide the follow data:
o
An IP address from which to down load the firmware.
o The path to the firmware. For this update, the path is /dsa500/mp_fw/222.
o The username and password for system with the firmware.
You prompted to check the inputs to make sure it is what you want. If you say yes and made no
mistakes, the firmware is updated. It takes 10 to 20 minutes depending upon how fast a
connection you have and how busy the system you use is.
7. If you borrowed an IP address, repeat steps 4 and 5 to remove the name and address (that is, reset
the management processor IP address and gateway back to the default value of 127.0.0.1 ).
8. I would unplug the system and plug it back in to force the Management Processor to reset itself.
You can skip this step if the system already has valid IP data for our LAB. If you do this step, you
need to repeat step 3.
Now return the network cable back to the 10/100 port used by the O.S. and EFI unplug the serial cable you
are done.
SAMPLE UPGRADE: NODE NAK (explanatory text added for clarification is in italics)
AJAX>$ set host/lat nak_con2 (Management processor serial console)
%LAT-S-CONNECTED, session to NAK_CON2 on node ZKO34LHB007LAT7 established
%LAT-I-TODISCON, type ^\ to disconnect the session
(Crtl/B typed to gain management processor attention.)
Leaving Console Mode - you may lose write access.
When Console Mode returns, type ^Ecf to get console write access.
Management Processor login: (<cr>)
Management Processor password: (<cr>)
Hewlett-Packard Management Processor
(c) Copyright Hewlett-Packard Development Company, L.P. 1999-2002. All Rights
Reserved.
System Name: uninitialized
*************************************************************************
MP ACCESS IS NOT SECURE
No MP users are currently configured and remote access is enabled.
Set up a user with a password (see SO command)
OR
Disable all types of remote access (see EL and ER commands)
*************************************************************************
MP Host Name: uninitialized
MP> lc
