Version 1.2 Page 34 4/22/04
MP:CM><CTRL-B>
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection
MP Host Name: kthulu
MP> CO
Event Logs
The system event logs eventually fill-up. When this happens, a warning is output during power up, and the
power up is delayed. To speed up the boot, you should clear the event logs by entering Crtl/B to get to the
MP consoles main display. Then enter the SL command. The following example shows output from an SL
command.
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Enter OS Session
HE: Main Help Menu
X: Exit Connection
MP Host Name: kthulu
MP> sl
Event Log Viewer Menu:
Log Name Entries % Full Latest Timestamped Entry
--------------------------------------------------------------------------
E - System Event 295 28 % 03 Nov 2003 14:42:16
F - Forward Progress 3210 80 %
B - Current Boot 110 36 % 03 Nov 2003 14:42:16
P - Previous Boot 123 41 % 03 Nov 2003 14:38:11
C - Clear All Logs
L - Live Events
Enter menu item or [Ctrl-B] to Quit:
To clear the system event log, enter c at the "Enter menu item or [Ctrl-B] to Quit:" prompt. See the
following example:
Enter menu item or [Ctrl-B] to Quit: c
Are you sure you want to clear all logs? (Y/[N]): y
-> Logs have been cleared.
