Chapter 1 17
Introduction
Starting a Localized Version of HP Easytime/XL
Customizing HP Easytime/XL
The system manager can use the setup program to customize the
HP Easytime/XL program. See “Customizing HP Easytime/XL” in this
manual. This program is optional. HP Easytime/XL arrives set up, it
can be used as is, or customize it to meet your particular needs.
Enabling HP Easytime/XL
Before using HP Easytime/XL, the program must be enabled. This is a
system administrator responsibility. If you are not the system
administrator, ask the system administrator to do this for you.
1. Log on to the system as MANAGER.SYS.
2. From the system prompt, type:
:RUN EASYTIME.PUB.SYS
Return
3. Press F5 OK to enable HP Easytime/XL.
Start HP Easytime/XL and begin performing tasks.
Disabling HP Easytime/XL
1. Log on to the system as MANAGER.SYS.
2. Start HP Easytime/XL.
3. Switch to system administrator mode.
4. From the Main menu, press
D for Disable HP Easytime/XL.
A dialog box prompts you for confirmation.
5. Press
F5 OK to confirm disabling HP Easytime/XL.
6. Press
F5 Yes to confirm again.
