Removal and replacement procedures 26
Removal and replacement procedures
Required tools
In performing any hardware configuration procedure you may need the following tools:
• System screwdriver (secured to the front panel door)
All hardware screws used in the server can be removed or fastened by using the system
screwdriver.
• All spare screws are located on the back side of the front panel door.
The following references and software tools may also be used:
• IPMI Event Log
• Diagnostics software
Server warnings and cautions
Before installing a server, be sure that you understand the following warnings and cautions.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal
system components to cool before touching them.
CAUTION: The server must always be operated with the system covers on. Proper cooling is not
achieved when the system covers are removed.
CAUTION: Whenever installing hardware or performing maintenance procedures requiring access
to internal components, it is recommended that users first back up all server data to avoid loss.
