Troubleshooting
Debug/Syslog Operation
session
Enables transmission of event notification messages to the
CLI session that most recently executed this command. The
session can be on any one terminal emulation device with
serial, Telnet, or SSH access to the CLI at the Manager level
prompt (ProCurve#_ ). If more than one terminal device has
a console session with the CLI, you can redirect the desti-
nation from the current device to another device. Do so by
executing debug destination session in the CLI on the
terminal device on which you now want to display event
messages.
Event message types received on the selected CLI session are
configured with the debug < debug-type > command. (Refer
to “Debug Messages” on page C-50.)
buffer
Enables Syslog logging to send the debug message types
specified by the debug < debug-type > command to a buffer
in switch memory. To view the debug messages stored in
the switch buffer, enter the show debug buffer command.
C-53
