Port Traffic Controls
Rate-Limiting
ProCurve(eth-3)# rate-limit mcast in percent 20
ProCurve(eth-3)# show rate-limit mcast
Multicast-Traffic Rate Limit Maximum %
Port | Inbound Limit Mode Radius Override
----- + ------------- --------- --------------
-
1 | Disabled Disabled No-override
2 | Disabled Disabled No-override
3 | 20 % No-override
4 | Disabled Disabled No-override
Figure 13-7. Example of Inbound Multicast Rate-limiting of 20% on Port 3
To disable rate-limiting for a port enter the no form of the command.
ProCurve(eth-3)# no rate-limit mcast in
ProCurve(eth-3)# show rate-limit mcast
Multicast-Traffic Rate Limit Maximum %
Port | Inbound Limit Mode Radius Override
----- + ------------- --------- --------------
-
1 | Disabled Disabled No-override
2 | Disabled Disabled No-override
3 | Disabled Disabled No-override
4 | Disabled Disabled No-override
Figure 13-8. Example of Disabling Inbound Multicast Rate-limiting for Port 3
Operating Notes
■ This rate-limiting option does not limit unicast traffic.
■ This option does not include outbound multicast rate-limiting.
13-21
