Setup Utility
Hardware and Software Guide 13–3
Navigating and Selecting in the
Setup Utility
Because the Setup utility is not Windows-based, it does not
support the TouchPad. Navigation and selection are by keystroke.
■ To choose a menu or a menu item, use the arrow keys.
■ To choose an item in a drop-down list or to toggle a field,
for example an Enable/Disable field, use either the arrow
keys or
f5 or f6.
■ To select an item, press enter.
■
To close a text box or return to the menu display, press esc.
To display additional navigation and selection information while
the Setup utility is open, press
f1.
Displaying System Information
The following procedure explains how to display system
information in the Setup utility.
1. To open the Setup utility, turn on or restart the notebook in
Windows, and then press
f10 while the prompt, “Press <F10>
to enter setup,” is displayed in the lower-left corner of the
screen.
2. Access the system information on the Main and Advanced
menus.
❏ To display most of the system information available in the
Setup utility, use the arrow keys to select the Main menu.
❏ To display video memory information, use the arrow keys
to select the Advanced menu.
3. To close the Setup utility without changing any settings, use
the arrow keys to select the Exit menu > Exit Discarding
Changes, and then press
enter. (The notebook restarts in
Windows.)
