Gefen ext-hdboost-141 Manual

A SERVICE OF

next previous

page | 37

Advanced Operation

Commands

#saveloedid

The #saveloedid command saves the local EDID as a .bin or .txt le.

When saving the EDID to a le, use the YModem protocol. This process can be selecting

Transfer > Receive le... within Windows® Hyperterminal. Once the le is saved, the

message “Saving EDID successfully” will be displayed.

Syntax

#saveloedid param1

Parameters

param1 Filename (.bin or .txt)

Example

#saveloedid myedid.bin

Waiting for the le to be received ... (press ‘a’ to abort)

Notes

The #saveloedid command is useful for saving data in EDID banks. Once the data in an

EDID bank has been overwritten, the original data cannnot be restored. To backup the data

in an EDID bank, do the following:

1. Copy the EDID data from the desired EDID bank to the local input using the

#edidbatolo command.

2. Use the #saveloedid command to save the EDID data to a le.