A SERVICE OF

logo

page | 2
Front Panel
ID Name Description
1 DIP switches Use this DIP switch bank to select a
pre-programmed EDID. See EDID
Programming for more information.
2 HDMI Out Connect the HDTV display to this port using
an HDMI cable.
3 WR Write-enable switch. Flip this switch to
the ā€œEā€ position to allow the booster to be
programmed with an EDID. Set this switch
to the ā€œDā€ position to disable programming
and prevent an accidental erasure of the
current EDID.
Getting Started
Panel Layout
1 3
2