Paper Handling
Problem
Solution
The printer does not
switch tractors
properly.
When you press the The printer may have tried to reverse feed
FRONT/REAR
button to
too many pages. Use the short tear off
switch tractors, the
feature to tear off the printed document or
paper jams or the
any excess paper so that the printer needs
printer does not feed
to reverse feed only one page. Then press
the paper back to the
the FRONT/REAR button to switch tractors.
standby position.
See page
2-20.
When you press the
FRONT/REAR
button to
switch tractors, the
pn’nter
does not load
paper onto the
selected tractor.
You may be trying to switch tractors when
labels are loaded in the printer.
Labels jam
when they are fed backward, so always
remove any labels loaded in
the printer
befQre
you switch tractors. To remove
labels loaded in the printer, tear off the
fresh supply
behn~
the tractor and press the
FORM FEED or
LINE
FEED button to eject the
remaining labels. See page
2-32.
The -printer may be out of paper. Load
paper onto the tractor. The tractor arrow
on the
PAPER SELECT
indicator should be
green. See pages
2-4
and
2-11.
Troubleshooting
7-17
