A SERVICE OF

logo

Open as PDF
next previous
Paper Cutter
Note: You can use the
ESC
EM printer command to change tractors
only when the paper cutter is installed. For more information
about this command, see the Command Summary in Chapter 9.
CAUTION:
When you load paper on the tractor, be sure that
the first page is tom off exactly at the perforation, and the
first four holes in the paper fit over the sprocket unit pins.
Removing the paper cutter
To remove the paper cutter, follow the steps below. After you
remove the paper cutter, store it in its original box and packing
materials.
1.
Cut off any printed document in the printer as described in the
section above on cutting off a printed document.
2. Turn off the printer.
5-28
Using the Printer Options