140
The Filter dialog box appears. To display only the
logs that match the specified criteria, enter the
criteria below and click OK. If no changes are
required, click Cancel.
2
[Specify Task.]
Select if filtering by task name, then enter the task name.
[Specify Server.]
Select if filtering by server name, then enter the server name.
[Error Type]
Specify the error type when filtering by error type.
● Not Specified
Selecting this item disables priority and code settings.
● Specify Priority.
From Error, Warning, or Information, select the error level to be displayed.
● Specify Code.
Select if only logs with the corresponding identification code are to be displayed,
then enter the identification code.
[Date & Time]
Filters logs by output date and time.
● Specify Start Date & Time.
When this item is selected and a date and time is entered, logs generated after the
specified start date and time are displayed.
● Specify End Date & Time.
When this item is selected and a date and time is entered, logs generated before the
specified end date and time are displayed.
Using VBCollector
To Set Display Criteria...
Choose Filter from the View menu.
1
Displaying logs according to selection criteria
Logs can be filtered according to type, code, or date and time so that only the required information
is displayed.
