A SERVICE OF

logo

Drive <DRIVE>: disc missing
No disc in drive, or disc is not seated and spinning properly. Recommended action is
to eject and re-insert the disc and type R
Drive <DRIVE>: disc is write protected
Attempt has been made to write on a disc with the Write Protect hole open. To use the
disc, eject, close the Write Protect hole, re-insert the disc and type R
Drive <DRIVE>: read fail
Hardware error reading disc. Recommended action is to eject and re-insert the disc and
type R
Drive <DRIVE>: write fail
Hardware error writing disc. Recommended action is to eject and re-insert the disc and
type R
Failed to load CP/M
Read error loading CP/M during |CPM command, or you are not using a valid system
disc containing CP/M.
AMSTRAD Disc Drive & Interface DDI-1 Manual Chapter 2. 14