Using the FIRE-18
14
ZOOM FIRE-18
2.
Play the open string you want to tune
The left side of the display shows the note which is closest to the current pitch. The right side of
the display shows how far the pitch is off. Adjust the pitch while observing the display.
3.
To change the tuner reference pitch, press one of the [
Q
]/[
W
] keys.
The current reference pitch is shown for two seconds. The default setting is "40" (center A = 440 Hz).
4.
While the reference pitch is shown, you can use the [
Q
]/[
W
] keys to change the setting.
The setting range is 35 – 45 (center A = 435 Hz – 445 Hz).
N
OTE
When power is turned off and on again, the reference pitch is reset to "40" (center A = 440 Hz).
5.
When tuning is complete, press the [TUNER] key to turn the tuner off.
The tuner function is disabled.
N
OTE
During use of the tuner, effects are turned off.
Switching the mode with the foot switch
Using the separately available foot switch, you can toggle between manual mode and program
mode during play.
1.
Turn off power to the FIRE-18 and connect the foot switch FS-01 (available separately)
to the [FOOT SW] jack.
A 8A8
The higher the rotation speed, the more the pitch is off.
Pitch is sharp Correct pitch Pitch is flat
40
42
F18-E.fm 14 ページ 2004年2月27日 金曜日 午後2時25分