Filter
Top Products
18 En
USEFUL OPERATION
You can change various settings of this unit using the
setup menu.
1 Press SETUP to enter the setup menu.
“1:SP LEVEL” is displayed in the front panel
display.
2 Press / to select menu and press
ENTER.
Repeat this procedure until desired menu/sub menu is
displayed.
3 Press / to adjust the value of each
menu.
Press and hold / to change the setting value
faster.
4 Press SETUP again to exit the setup menu.
y
• Press RETURN or to return to the previous menu.
• Press to enter the next menu.
If you do not operate within 30 seconds after entering the setup
menu, the unit automatically exits the setup menu.
Setup menu
Setup menu list
Menu Sub menu Features Page
1:SP LEVEL 1-1:FRONT L
Adjusting the volume balance with test tone ☞ P. 19
1-2:FRONT R
1-3:CENTER
1-4:SURROUND L
1-5:SURROUND R
1-6:SUBWOOFER
2:TONE CONTROL 2-1:BASS
Adjusting high/low frequency sound (tone control) ☞ P. 19
2-2:TREBLE
3:HDMI SETUP 3-1:CONTROL
Configuring the HDMI settings ☞ P. 19
3-2:AUDIO
4:DISPLAY MODE Changing the brightness of the front panel display ☞ P. 19
5:SP SETUP 5-1:SP CHANNEL Selecting the number of channel
☞ P. 20
5-2:SP TYPE Changing the setting of the speaker type
5-3:SP DISTANCE Setting the distance between the speakers
5-4:CROSSOVER Cutting the crossover register
6:FIRMWARE 6-1:VERSION Displaying the firmware version of this unit
☞ P. 17
6-2:USB UPDATE Updating the firmware of this unit
7:D.RANGE Adjusting the dynamic range ☞ P. 21
8:MATRIX DECODE 8-1:DECODE MODE Selecting the decoder
☞ P. 21
8-2:C.IMAGE Adjusting the center image
Basic procedure
ENTER
SETUP
/
RETURN
Note