Filter
Top Products
FM tuning
17 En
BASIC
OPERATION
English
Basic tuning operation
Manual tuning
If the signal received from the station you want to select is weak, you can tune into the desired station by specifying
the frequency manually. In the FM tuning mode, press AUTO/MAN’L repeatedly so that the AUTO indicator
disappears and then press +/– repeatedly to specify the frequency of the desired station.
If you tune into a station by using the manual tuning feature, this system receives the FM radio signals in the monaural
reception mode to increase the signal quality.
ROOM EQ
DE
C
MODE
C
E
NTER
SW
NIGHT
MEMORY
MUTE
A-E
A-E
MENU
DOCK
FM INPUT
INPUT 3INPUT 2
INPUT 1
MOVIE MUSIC
SPORTS
VOLUME
AUTO
/MAN'L
PRESET
/
TUNE
SUR
ENTER
1
2
3
1
Press FM to select this system to the FM tuner
mode.
“FM” appears in the front panel display.
2
Press AUTO/MAN’L so that the AUTO indicator
lights up in the front panel display.
This system is set to the automatic tuning mode.
y
If a colon (:) appears, this system is set to the preset tuning mode
and the frequency tuning is not possible. Press PRESET/TUNE
to
turn the colon (:) off.
3
Press +/– once to begin automatic tuning.
When this system is tuned into a station, the TUNED
indicator lights up and the frequency of the received station
is shown in the front panel display.
y
When you tune into an FM station by using the automatic tuning
mode, this system receives the FM radio signal in the stereo
reception mode. The STEREO indicator appears in the front panel
display.
FM
AUTO
A FM 88.9 MHz
No colon (:)
Lights up
TUNED
A FM 89.1 MHz
Lights up