Filter
Top Products
Basic playback operation
13 En
BASIC
OPERATION
English
Once you have finished all cable connections (see pages 9 to 12) and remote control preparation (page 6), follow the
procedure below to start basic playback operation.
Basic playback operation
1
Press STANDBY/ON.
This system turns on and the power indicator lights up. To set this system to the
standby mode, press STANDBY/ON again.
y
This system has the auto-sleep function which automatically switches to the standby mode if you
do not operate this system for about 24 hours while this system is turned on.
2
Press one of the input buttons to select an input source.
For example, if a DVD player is connected to the INPUT 1 jack of the subwoofer/
system control, press INPUT 1 to select the DVD player.
y
You can also switch the input source by pressing INPUT repeatedly. The input source changes as
follows:
3
Start playback on the selected external component.
For information on the external component, refer to the manual for the product.
4
Press VOLUME +/– to adjust the volume level.
y
To turn off the volume temporarily, press MUTE. While the mute function is activated, the
MUTE indicator flashes. To resume the volume, press MUTE again.
INPUT 1 INPUT 2 INPUT 3 DOCK FM
Enjoy
Sounds
R
SW
H
T
MEMO
R
Y
MUTE
A-E
A-E
MENU
DOCK
FM INP
UT
INPUT 3INPUT 2
IN
PUT 1
MOVIE MUSIC
SPORTS
GAME
STANDBY/ON
VOLUME
A
U
TO
/MAN'L
PRE
SET
/TUNE
ENTER
1
2
4
Now, try various features of this system!
Using various sound features
• To enjoy high realistic sounds with a sound field
program ☞ P. 14
• To enjoy stereo sounds such as CD audio with multi
channels ☞ P. 15
• To enjoy various input sources at lower volume
☞ P. 15
• To configure the position of virtual surround
speakers ☞ P. 22
Enjoying FM broadcast/iPod playback
• To listen to FM broadcast ☞ P. 16
• To control iPod playback ☞ P. 20