Filter
Top Products
40
SET MENU
6 DOLBY D. SET (Dolby Digital
set)
This setting is effective only when this unit decodes
Dolby Digital signals.
■ LFE LEVEL
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital signal. The LFE signal carries the low-
frequency special effect sound which is only added to
certain scenes.
Control value (dB): –20 to 0
Initial setting: 0 dB
Notes
• Adjust the LFE level according to the capacity of your
subwoofer.
• Normally, around –6 dB to –8 dB is most suitable for listening
at home.
■ D-RANGE (dynamic range)
Use this feature to adjust the dynamic range (the
difference between the maximum level and the minimum
level of sounds).
Choices: MAX, STD (standard), MIN
Initial setting: MAX
• Select MAX for feature films.
• Select STD for general use.
• Select MIN for listening to sources at an extremely
low volume level.
L-LEVEL BST
H-LEVEL CUT
0.0
0.0
1.0
1.0
MAX
Dialog
level
Input level
Output level
STD
Dialog
level
Input level
Output level
MIN
Dialog
level
Input level
Output level
Note
• When you select MIN, the sound output may be faint because
some Dolby Digital signals are not compatible with the
minimum-level dynamic range. In this case, select MAX or
STD.
7 DTS SET (DTS LFE level)
This setting is effective only when this unit decodes DTS
signals.
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a DTS
signal. The LFE signal carries the low-frequency special
effect sound which is only added to certain scenes.
Control range (dB): –10 to +10
Initial setting: 0 dB
Note
• Adjust the LFE level according to the capacity of your
subwoofer.
7 DTS SET
LFE LEVEL • • • • 0dB
: Exit/
–/+ : Adjust
6 DOLBY D. SET
: Select/
–/+ : Adjust
LFE LEVEL
• • • • 0dB
D-RANGE
• • •
MAX
STD
MIN
0108V620(UCA)_35-43_EN 1/16/1, 11:11 AM40