Filter
Top Products
35
English
INTRODUCTION PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
CINEMA-DSP
CINEMA-DSP Programs
■ For movie programs: No. 9 to 11
According to the input signal format, this unit automatically chooses the appropriate decoder and DSP sound field
pattern.
Table of Program Names for Each Input Format
MOVIE
THEATER 1
MOVIE
THEATER 2
DOLBY
DIGITAL
DTS DIGITAL
SUR
PRO LOGIC
PRO LOGIC
DTS Neo: 6
2 channel
Stereo
70 mm Spectacle
70 mm Sci-Fi
70 mm Adventure
70 mm General
—
—
—
—
Normal
Enhanced
Movie
Music
Cinema
Music
DOLBY DIGITAL
DGTL Spectacle
DGTL Sci-Fi
DGTL Adventure
DGTL General
Normal
Enhanced
—
—
—
—
—
—
—
—
5.1 channel
DTS
DTS Spectacle
DTS Sci-Fi
DTS Adventure
DTS General
—
—
Normal
Enhanced
—
—
—
—
—
—
DTS ES
Spectacle ES
Sci-Fi ES
Adventure ES
General ES
—
—
ES Matrix 6.1
ES Discrete 6.1
*
2
Enhanced ES
—
—
—
—
—
—
6.1 channel *
1
Input
Program
DOLBY DIGITAL
Spectacle 6.1
Sci-Fi 6.1
Adventure 6.1
General 6.1
Matrix 6.1
Enhanced 6.1
—
—
—
—
—
—
—
—
*1 means the 6.1/ES decoder is ON.
*2 means the DTS ES software encoded with Discrete 6.1 is input.
y
• If a Dolby Digital signal or DTS signal is input when the input mode is set to AUTO, the DSP program will be automatically
switched to the Dolby Digital playback sound field or DTS playback sound field.
• If Dolby Digital Surround EX software or DTS ES software is played when AUTO is selected by pressing the 6.1/ES button on the
remote control, the Dolby Digital Matrix 6.1 or DTS ES decoder usually turns on and the corresponding DSP program is selected.
• 6.1/ES on the remote control can be used to play Dolby Digital or DTS 5.1 channel sources with rear center speaker. In this case the
program name changes to the corresponding name for 6.1 channel.
• When playing 6.1 channel source with 6.1/ES on the remote control off, the program name changes to the corresponding name for
5.1 channel.
Note
• The “ ” indicator does not light up when selecting the program No. 11 except for the Enhanced mode.
No.
9
10
11