Filter
Top Products
4
The 40 presets are arranged into five
groups from A through E, with eight
presets in each group.
E
√
/
®
(Down/Up) keys
These keys are used to select sound field
programs, preset stations, and tune the
AM/FM tuner.
F
Volume control
This control adjusts the speaker and
headphone volume.
G
Headphone jack
Stereo headphones can be connected to
this mini-jack for private listening,
with Virtual 3D effects specifically tai-
lored for headphone listening.
H
Power switch
This switch is used to turn on the
RP-U100 or set it to standby mode. In
standby mode, the RP-U100 can be
turned on remotely from your PC,
using the supplied RP-U100 Applica-
tion Software. Note that the RP-U100
uses a small amount of power in
standby mode.
Rear Panel
A
ANALOG inputs & outputs
These connectors are used to connect
to the analog inputs and outputs of a
PC sound card, CD player, or MD/tape
recorder. The SUB WOOFER OUT can
be connected to an optional subwoofer,
such as the Yamaha YST-SW45, for
enhanced bass performance.
B
ANTENNA
These connectors are used to connect
AM and FM antennas.
C
SPEAKERS
These connectors are used to connect a
pair of speakers, such as the Yamaha
NS-U50.
D
DIGITAL inputs & outputs
These connectors are used to connect
to the digital inputs and outputs of a PC
sound card, CD player, or MD recorder.
If your PC has a USB port, connect it to
the RP-U100 using the supplied USB
cable, for remote RP-U100 control
from your PC.
ANALOG
PC IN
AUX 1
IN
SUB
WOOFER
OUT
IN
OUT
AUX 2
R L
ANTENNA
AM
FM
75 Ω
UNBAL
GND
DIGITAL
SPEAKERS
6Ω MIN./SPEAKER
+
–
USB
OPT OUT
AUX 1
OPT IN
COAX IN
PC
OPT IN
R L
1
2
3
4