Filter
Top Products
11
Using the Tuner
Locating Radio Stations
Manually
1. Use the P-SET key to select Frequency
Display mode.
In Frequency Display mode, the radio
frequency is displayed, as shown here.
2. Press the TUNER key repeatedly to
select one of the following tuner
bands: FM Auto Stereo, FM Mono, or
AM.
3. Use the Down [√] and Up [®] keys
to locate radio stations.
Use the Down [√] key to lower the fre-
quency; the Up [®] key to increase it.
Note: If there is noise in an FM Stereo
broadcast, try switching to FM Mono.
Locating Radio Stations
Using Auto Search
1. Press the TUNER key repeatedly to
select one of the following tuner bands:
FM Auto Stereo, FM Mono, or AM.
2. Use the P-SET key to select the
Frequency Display mode.
In Frequency Display mode, the radio
frequency is displayed, as shown here.
3. Press and hold the Down [√] or Up
[®] key to start Auto Search.
Auto Search starts from the current
radio frequency. Use the Down [√] key
to search down; the Up [®] key to
search up. The RP-U100 stops search-
ing when it locates a station. To search
for another station, repeat step 3.
Note: If Auto Search cannot locate a
station due to its weak signal, try locating
the station manually.
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
1170G
FM MonoFM Auto Stereo
AM
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
1170G
FM MonoFM Auto Stereo
AM
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
92.50
Frequency Display mode