Filter
Top Products
13
Selecting Presets
1. Use the P-SET key to select Preset
mode, as shown below.
2. Use the P-SET key to select a preset
group from A through E.
3. Use the Down [√] and Up [®] keys
to select a preset number from 1
through 8.
The radio station stored in the preset is
selected.
4. Press the TUNER key to check the
frequency of the radio station.
The frequency is displayed for a few
seconds.
Note: If there is noise in an FM Stereo
broadcast, store the preset again using FM
Mono.
Copying Presets
Once stored, presets can be arranged using
the Preset Copy function. You may, for
example, want to copy your favorite radio
station to preset A1.
1. Use the P-SET key to select Preset
mode, as shown below.
2. Use the P-SET key to select the preset
group, and the Down [√] and Up
[®] keys to select the preset number
of the preset you want to copy.
3. Press and hold the P-SET key until
“MEMORY” flashes on the display.
4. While “MEMORY” is flashing, use
the P-SET key to select the preset
group, and the Down [√] and Up
[®] keys to select the preset number
of the destination preset. Then press
and hold the P-SET key until the
group and number (e.g., “B3”) of the
preset be copied flashes on the
display.
The preset is copied.
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
82.A3
Preset mode
VIRTUAL
USB
FM
VOL
AM ST MEMORY
DSP
PCM DD
82.A3
Preset mode