Filter
Top Products
32
SET MENU
1
3,6
4,5
2
ADVANCED OPERATION
1 Press AMP(TUNER) on the
component selector.
2 Press SET MENU to enter the SET MENU.
3 Press PRG– (or PRG+) repeatedly to select the
item (1 to 9) you want to adjust.
y
• By pressing SET MENU repeatedly, you can select items in the
same order as when pressing PRG–.
4 Press – or + once to enter the setup mode of
the selected item.
The last setting you adjusted appears on the display.
Depending on the item, press PRG– (or PRG+) to
select a sub item.
5 Press – or + repeatedly to change the setting
of the item.
6 Press PRG– (or PRG+)
repeatedly until the input
source name appears to
exit from the SET MENU.
The SET MENU consists of 9 items including the speaker
mode setting. Use the SET MENU to enjoy the optimum
audio/video playback for your system.
y
• You can adjust the items on the SET MENU while playing a
source.
1 SPEAKER SET
CENTER SP
MAIN SP
REAR LR SP
BASS OUT
MAIN LVL
2 HP TONE CTRL
3 I/O ASSIGN
4 INPUT MODE
5 DOLBY D. SET
LFE LEVEL
D-RANGE
6 DTS SET
7 SP DLY TIME
8 DISPLAY SET
9 MEM. GUARD
Adjusting the Items on the SET
MENU
Adjustment should be made with the remote control.
Note
• Some items require extra steps to change to the desired setting.
0107HTR5450/5440_32-39_EN 3/28/1, 4:49 PM32