Filter
Top Products
71
SOUND FIELD PARAMETER DESCRIPTIONS
SOUND FIELD
PROGRAMS
■ Dialogue Lift (Dialog lift)
Function: Adjusts the height of the front and center channel sounds by assigning some of the front and center
channel elements to the presence speakers.
Description: The larger the parameter, the higher the position of the front and center channel sound.
Choices: 0, 1, 2, 3, 4, 5
For 2ch Stereo
Direct (Pure direct)
Function: Bypasses the decoders and DSP processors of this unit and shuts down the video circuitry to ensure the
highest possible sound fidelity from analog and PCM sources.
Choices: Off, On
For 7ch Stereo
Function: Adjusts the volume level for each channel in 7-channel stereo mode.
Control range: 0 to 100%
Center Level (Center level)
Surround L Level (Surround left level)
Surround R Level (Surround right level)
Sur.Back Level (Surround back level)
Presence L Level (Presence left level)
Presence R Level (Presence right level)
For PL x Music
Panorama (Panorama)
Function: Extends the front stereo image to include the surround speakers for a wraparound effect.
Choices: Off, On
Center Width (Center width)
Function: Adjusts the center image from all three front speakers to varying degrees.
A larger value adjusts the center image towards the front left and right speakers.
Control range: 0 (center channel sound is output only from center speaker) to 7 (center channel sound is output only
from front left and right speakers), initial setting is 3
Dimension (Dimension)
Function: Gradually adjusts the sound field either towards the front or towards the rear.
Control range: –3 (towards the rear) to +3 (towards the front), initial setting is STD (standard)
For Neo:6 Music
Center Image (Center image)
Function: Adjusts the center image from all three front speakers to varying degrees.
Control range: 0.0 to 1.0