Filter
Top Products
34
AUTO SETUP
5 Press k / n repeatedly to select Wiring,
Distance, Size, Equalizing or Level and then
press h.
6 For Wiring, Distance, Size or Level, select:
Check To automatically check and adjust the selected
item.
Skip To skip the selected item and perform no
adjustments.
y
When using THX speakers, select “Skip” for Size and make
sure that “Small” or “Small x2” is selected in Speaker Set
(see page 90) and that “80Hz” is selected in Bass Cross
Over (see page 92).
For Equalizing, press k / n to select:
Skip To skip the selected item and perform no
adjustments.
Check: Natural To average out the frequency response of all
speakers with higher frequencies being less
emphasized. Recommended if the “Flat”
setting sounds a little harsh.
Check: Flat To average the frequency response of all
speakers. Recommended if all of your
speakers are of similar quality.
Check: Front To adjust the frequency response of each
speaker in accordance with the sound of
your front speakers. Recommended if your
front speakers are of much higher quality
than your other speakers.
7 Once you have selected the desired setting,
press l to move back to Setup Menu.
8 Press n to select Setup Type and then select:
Auto To automatically perform the entire
AUTO SETUP procedure.
Step To pause for confirmation between
each check in the AUTO SETUP
procedure.
Skip
Check
Wiring
Distance
Size
Skip
Check
Distance
Size
Equalizing
Wiring
Skip
Check
Size
Equalizing
Level
Distance
Wiring
Skip
Check: Natural
Check: Flat
Check: Front
Equalizing
Level
Size
Distance
Skip
Check
Level
Equalizing
Size
Setup Menu
Setup Type
Start
Wiring
Distance
Size
Information
Setup Type
Start
Auto
Step
Setup Menu
Information