Filter
Top Products
4
CONNECTIONS
■ Attaching the cable plugs (A) to
the speaker cables
1 Pull both sides of the cover of the cable plug (A)
firmly away from the top of the plug, then partially
remove the top part of the cover.
2 Peel away about 15 mm of covering from the tip of
a commercially available speaker cable and twist
the cable core firmly in a clockwise direction.
Twisting loosely may cause a short circuit.
3 Match the speaker cable polarity (+/–) with the
polarity mark (+/–) of the cable plug, then insert
each cable core into the cable plug (A). Be sure
that it is firmly in contact with the metal part of the
speaker cable.
4 Replace the cover.
Attach the other cable plug (A) in the same way.
■ Connecting the wireless receiver
unit
1 Remove the cover from the wireless receiver unit
as shown below, to access the connection
terminal. Connect your rear speaker terminals
with the corresponding color terminals on the
wireless receiver unit. Reattach the cover.
2 Insert the stand into the brackets as shown below.
3 Connect the AC power cable of the wireless
receiver unit to an AC outlet.
Connecting the wireless receiver
unit
Good No Good
15 mm
←
To
AC outlet
Surround R
speaker
Surround L
speaker
(Blue)
(Gray)