Filter
Top Products
31
English
INTRODUCTION
PREPARATION
BASIC
OPERATION
ADVANCED
OPERATION
ADDITIONAL
INFORMATION
APPENDIX
TUNING
y
• Use the manual tuning method if the tuning search does not
stop at the desired station because the signal is weak.
• When tuned in to a station, the “TUNED” indicator lights up
and the frequency of the received station is shown on the front
panel display. If an RDS station that offers the PS data service
is being received, the station name is shown instead of the
frequency on the front panel display.
If the signal from the station you want to select is weak,
you must tune in to it manually.
1 Press INPUT l / h to
select TUNER as the input
source.
2 Press FM/AM to select the reception band.
“FM” or “AM” appears on the front panel display.
3 Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator lights up on the
front panel display.
If “ z ” appears on the front panel display next to the
band indication, press PRESET/TUNING (EDIT) to
turn it off.
4 Turn the multi jog knob to
the right or left to tune in
to the desired station
manually.
Note
• Manually tuning in to an FM station will automatically change
the reception mode to monaural to increase the signal quality.
INPUT
4 Turn the multi jog knob to the right or left to
begin automatic tuning.
Turn the multi jog knob to the
right for tuning in to a higher
frequency, or to the left for
tuning in to a lower frequency.
Turn the knob again if the
tuning search does not stop at
the desired station.
TUNING
MODE
AUTO/MAN'L MONO
AUTO
Goes off
PRESET
/TUNING
EDIT
Turn “ z ” off.
SILENT VIDEO AUX
PHONES S VIDEO VIDEO L AUDIO R OPTICAL
6CH INPUTINPUT MODE
INPUT
VOLUME
RDS MODE/FREQ
EON
PTY SEEK
MODE START
PRESET
/TUNING
EDIT
MEMORYEFFECT
MAN'L/AUTO FM
TUNING
MODE
AUTO/MAN'L MONO
FM/AM
DSP
PROGRAM
BASS TREBLE SPEAKERS
AB
OFF
ONOFFON
STANDBY
/ON
DIGITAL
BASS
EXTENSION
– + – +
SURROUND
DIGITAL
4
23
1
Automatic (or Manual) Tuning
Automatic tuning is effective when station signals are
strong and there is no interference.
1 Press INPUT l / h to
select TUNER as the input
source.
2 Press FM/AM to select the reception band.
“FM” or “AM” appears on the front panel display.
or
FM/AM
TUNING
MODE
AUTO/MAN'L MONO
AUTO
Lights up
PRESET
/TUNING
EDIT
Turn “ z ” off.
or
3 Press TUNING MODE (AUTO/MAN’L MONO)
so that the “AUTO” indicator goes off from
the front panel display.
If “ z ” appears on the front panel display next to the
band indication, press PRESET/TUNING (EDIT) to
turn it off.
INPUT
FM/AM
0106V620RDS_30-34_EN 1/18/1, 7:25 PM31