Filter
Top Products
26
BASIC PLAYBACK
INPUT MODE
■ BGV (background video) function
The BGV function allows you to combine a video image
from a video source with a sound from an audio source.
(For example, you can listen to classical music while you
are watching a video.)
Select a source from the video group and then select a
source from the audio group with the input selector
buttons on the remote control. The BGV function does
not work if you select the sources with INPUT l / h on
the front panel.
Input Modes and Indications
When using the remote control, set the selector dial to
the AMP/TUN position.
This unit comes with various input jacks. If your
component is connected to more than one type of input
jack, you can set the priority of the input signal.
Press INPUT MODE (or the input selector
button that you have pressed to select the
input source on the remote control)
repeatedly until the desired input mode is
shown on the front panel display and on the
video monitor.
Front panel
or
Remote control
Input mode
AUTO: In this mode, the input signal is
automatically selected in the
following order:
1) Dolby Digital or DTS signal
2) Digital (PCM) signal
3) Analog signal
DTS: In this mode, only the digital input
signal encoded with DTS is selected
even if another signal is input at the
same time.
ANLG (ANALOG):In this mode, only the analog input
signal is selected even if a digital
signal is input at the same time.
Notes
• If digital signals are input from both the COAXIAL and
OPTICAL jacks, the digital signal from the COAXIAL jack is
selected.
• When AUTO is selected, this unit automatically determines the
type of signal. If this unit detects a Dolby Digital or DTS
signal, the decoder automatically switches to the appropriate
setting and reproduces 5.1 channel source.
• The sound output may be interrupted for some LD players and
DVD players in the following situation:
When the input mode has been set to AUTO and a search is
performed while playing the source encoded with a Dolby
Digital or DTS signal, the sound may delay for a moment when
playback is resumed.
• Depending on the LD player, playback may not be made when
playing an LD that is not digitally recorded with the input
mode set to AUTO. If this happens, set the input mode to
ANALOG.
VOLUME
CDTUNER PHONO
MD/CD-R
DVD
D-TV/CBL
VCR 1
VCR2/DVR
V-AUX
0105V620RDS_24-29_EN 1/18/1, 7:25 PM26