Filter
Top Products
En 74
• Some early Dolby Digital Surround EX or DTS-ES sources do not contain a flag for reproducing surround
back channel. We recommend you set “Extended Surround” to “bPLIIx Movie” or “EX/ES” when playing
back those sources.
❑ Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.48).
• This setting is applied separately to each input source.
• You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.48).
Settings
Default
TUNER, USB, SERVER, NET RADIO, AirPlay (network sources), Bluetooth: On (On)
Others: Off (Off)
■ Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
❑ Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
• This setting is applied separately to each input source.
Setting range
-6.0 dB to 0.0 dB
to +6.0 dB (0.5 dB increments)
❑ Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB
to +6.0 dB (0.5 dB increments)
■ Lipsync (Lipsync)
Enables/disables the adjustment configured in “Lipsync” (p.87) in the “Setup” menu.
• This setting is applied separately to each input source.
Settings
Default
AirPlay: Off (Off)
Others: On (On)
■ Signal Info (Signal Info)
Displays information about the video/audio signal.
Choices
• To switch the information on the front display, press the cursor keys (q/w) repeatedly.
EX/ES (EX/ES)
Automatically selects the Dolby EX or DTS-ES decoder, and
reproduces signals in 6.1- or 7.1-channel.
Off (Off)
Always reproduces signals in their original channels. (Even when
DTS-ES or Dolby Digital Surround EX signal is input, the unit
reproduces the signal in 5.1-channel.)
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Off (Off) Disables the “Lipsync” adjustment.
On (On) Enables the “Lipsync” adjustment.
Format (FORMAT) Audio format of the input signal
Channel (CHANNEL)
The number of source channels in the input signal
(front/surround/LFE)
For example, “3/2/0.1” means 3 front channels, 2 surround channels,
and LFE.
Sampling
(SAMPLING)
The number of samples per second of the input digital signal
Bitrate (BITRATE) The amount of data per second of the input bitstream signal
Video In (VIDEO IN) Type and resolution of the input digital signal
Video Out
(VIDEO OUT)
Type and resolution of the output digital signal
00_RX-V479_V579_om_U.book Page 74 Wednesday, March 25, 2015 9:59 AM