Filter
Top Products
OPERATION MODES OF FRONT PANEL CONTROLS
139 En
ADDITIONAL
INFORMATION
English
If you perform a mode trigger operation using the front panel controls, this unit enters the following mode. In each mode,
you can use the front panel controls as shown below. If no operation is performed for five seconds in each mode, this unit
automatically returns to the default mode.
Available operations in each mode
* In the BT pairing mode, this unit searches for Bluetooth components to be paired. This mode is available only when “DOCK” is
selected as an input source and a Yamaha Bluetooth wireless audio receiver (such as YBA-10, sold separately) is connected to the
DOCK terminal of this unit.
Operation modes of front panel controls
Mode trigger button Mode to enter
—
Default mode
Press DAUDIO SELECT/REC OUT
Audio select mode
Press and hold DAUDIO SELECT/REC
OUT
Rec out mode
Press DMENU
GUI menu mode
Press DTONE CONTROL
Sound adjust mode
Press and hold EENTER
BT pairing mode
Mode
DAUDIO
SELECT/REC
OUT
DMENU
DTONE
CONTROL
EENTER
MPROGRAM
selector
Default
to Audio select mode to GUI menu mode
to Sound adjust
mode
—
Select a sound field
programs (page 40)
Audio select
to default mode to GUI menu mode
to Sound adjust
mode
—
Select an audio input
jack (page 37)
Rec out
to Audio select mode to GUI menu mode
to Sound adjust
mode
—
Select a recording
source (page 47)
GUI menu
to Audio select mode to default mode —
Confirm the
selection in the GUI
menu (page 79)
Menu up/down
Sound adjust
to Audio select mode to GUI menu mode
Select a parameter
for adjustment
(page 47)
—
Adjust parameters
(page 47)
BT pairing*
to Audio select mode
(the pairing process
continues)
to GUI menu mode
(the pairing process
continues)
—
to default mode (the
pairing process
continues)
Select a sound field
program
Note