Filter
Top Products
102 En
Saving and recalling the system settings (System Memory)
■ Renaming the stored settings
1 Follow steps 1 to 4 in “Saving by the GUI
menu operation” (page 101).
2 Press 9k / n repeatedly to select “xxx
Rename” and then press 9h.
“xxx” indicates the zone you selected in step 1.
3 Press 9k / n repeatedly to select the desired
memory number and then press 9h.
4 Press 9k / n / l / h to select a character or
function and then press 9ENTER to
confirm the selection.
Repeat step 4 until you input a name you want to use.
5 Press 9k / n / l / h to select “OK” and then
press 9ENTER.
y
• To reset the name, select “RESET” and then press 9ENTER.
• To cancel the operation without change, select “CANCEL” and
then press 9ENTER.
6 Press IMENU to turn off the GUI menu.
If you change the language setting (page 100 or 123), names of
the memory settings will be automatically reset.
■ Parameters to be saved
The parameter groups indicated in bold are selected by
default.
Main zone parameters
Zone 2 and Zone 3 parameters
Note
Group Parameters Page
Input/HDMI
Out
Audio Select
85
Decoder Mode
85
Input source 36
HDMI OUT SEL
37
Audio Stereo/Surround
80
PURE DIRECT on/off 47
EXTD SUR. setting 75
Adaptive DRC
89
Adaptive DSP Level
89
LFE Level
90
Dynamic Range
90
Tone Control
92
Pure Direct
93
CINEMA DSP 3D mode on/off 46
Volume Volume level
36
SP Config Parametric EQ
90
Configuration
87
Distance
88
Level
89
Information (Auto Setup)
34
Setup Menu (Auto Setup)
30
Video/
Display Set
Analog ` Analog
93
Analog ` HDMI
93
HDMI ` HDMI
94
Processing
94
Short Message
98
Playback Screen
98
Position
99
Wall Paper
99
Others Lipsync
92
Front Panel Display
98
Audio Output
95
Parameter Descriptions Page
Input
Input source
120
Vo l u m e
Volume level
120
Tone Control
Tone control settings
120
Group Parameters Page