Filter
Top Products
5
Introduction
Thank you for purchasing a Yamaha PC9501N, PC6501N, PC4801N, PC3301N, or PC2001N Series Power
Amplifier.
The PC Series of power amplifiers was developed from Yamaha’s wealth of experience in building PA
equipment and its tradition of careful attention to every detail of circuit design. These power amplifiers feature
high power and superb quality together with superior reliability and stability, guaranteeing the highest
possible audio performance.
Main features include
• Three modes are provided to support a broad range of applications: STEREO mode which can be driven by
two independent sources, PARALLEL mode in which a monaural source drives both channels, and BRIDGE
mode in which the two internal amps function as a single mono amp.
• Balanced XLR connector and Euroblock connector inputs, and Speakon connector and five-way binding
post outputs are provided.
•A high pass filter switch that cuts frequencies below 20 Hz, and detented attenuators and level meters for
channels A and B are provided.
• Metering and indicators include easily visible two-channel level meters, a PROTECTION indicator that
shows the state of various protection systems (power on/off detection, output protection, DC detection), a
TEMP indicator that indicates heat sink overheating, and a REMOTE indicator that indicates the external
remote status.
•Variable-speed low-noise fans ensure high reliability.
• The PC3301N enables parallel connection of multiple high-impedance speakers that support 100 V line
output.
• An optional external amp control device, such as the ACD1 or ACU16-C, enables you to monitor or control
the amplifier via a network. For the latest information about amp control devices, please visit our website:
http://www.yamahaproaudio.com/
This Owner’s Manual applies to the PC9501N, PC6501N, PC4801N, PC3301N, and PC2001N power
amplifier. In order to take full advantage of your power amplifier and enjoy long and trouble-free operation,
please read this Owner’s Manual carefully before using your Power Amplifier.
Contents
Introduction ............................................................ 5
Controls and Functions......................................... 6
Front Panel.......................................................... 6
Rear Panel .......................................................... 7
Speaker connections........................................... 8
Connection ............................................................. 9
Using a Euroblock connector .............................. 9
Speaker Connection............................................ 9
Air Flow ................................................................. 10
Rack Mounting ..................................................... 10
Specifications....................................................... 11
General Specifications ...................................... 11
Block Diagram................................................... 12
Dimensions ....................................................... 13
Troubleshooting................................................... 14
Current Draw ........................................................ 14