Yamaha NS-P116 Speaker System User Manual


 
E-6
If you want to mount a speaker on a commercially available speaker stand
for the front/rear speakers (and rear center speaker for NS-P116)
Mounting
bracket
(AAX34790)
Screw
(AAX12390)
60 mm
1 Attach the bracket (AAX34790) to the bottom of the
speaker by using the screw (AAX12390) so that the
convex part of the bracket fits in the grooved part on
the bottom of the speaker as shown on the left.
2 Mount the speaker on the speaker stand by using a
pair of screw holes (at an interval of 60 mm) on the
bracket.
* Those screw holes can be used with M4 screws
only.
Placing the the front/rear speakers (and rear center speaker for
NS-P116)
Nonskid pad
When placing the speakers on a flat surface, attach the
included nonskid pads to the corners on the bottom of the
speakers as shown on the left. This prevents the speakers
from sliding around.
* For NS-P116, the nonskid pads include four spare ones.
X 4
<NS-P110>
X 5
<NS-P116>
X 4
<NS-P110>
X 5
<NS-P116>
The following optional accessories are needed for mounting the speakers on commercially available speaker stands.
* Inquire at your authorized YAMAHA dealer for the optional accessories.
Mounting bracket (AAX34790) Screw (AAX12390)
2-NS-P110-116-U.p65 05.3.11, 4:27 PM6