Filter
Top Products
OPERATION
11
USING THE
MCX-CA15
In “B” mode, the MCX-CA15 automatically
activates (exits sleep mode) when its circuitry senses
a signal input from an external source connected to
the AUDIO IN jack.
You can use INPUT SENSE to change the
detectable signal threshold.
Turn INPUT SENSE to the right to increase
the detectable signal threshold.
Turn INPUT SENSE to the left to decrease
the detectable signal threshold.
• If no input source is detected for five minutes or
longer, this function automatically switches the
MCX-CA15 to sleep mode.
• In sleep mode, output from the MCX-CA15 is
muted.
• If you turn INPUT SENSE all the way to the left,
the MCX-CA15 always remains in the active
state. If you turn it all the way to the right, the
MCX-CA15 always remains in sleep mode.
• This function is only available when the
MCX-CA15 is set to “B” mode.
The RESET button is located on the inside front
panel.
Press the RESET button to restart the
MCX-CA15 only if:
• The MCX-CA15’s protection circuitry has been
activated and the unit has switched itself off.
• You have changed the operation mode using the
MODE switch.
When the MCX-CA15 is connected to a client and
you want to reset the system, press and hold on
the client for ten seconds.
Input level sensing function
Notes
INPUT SENSE
RESET button
Note
MODE
RESET
INPUT SENSE
AB
C
RESET
00_MCX-CA15_Owners_UB.book Page 11 Friday, April 30, 2004 10:53 AM