Filter
Top Products
OPERATION
10
■ To switch the operation mode
You can switch between the operation modes on the
MCX-CA15 by sliding the MODE switch located
on the inside front panel to the left and right.
• Always check that the operation mode is
set correctly before performing automatic
or manual configuration on the client.
• Make sure you press RESET after
switching the operation mode.
1 Gently grasp the edges of the front
panel and pull it away from the main
unit.
The MODE switch is now visible in the upper
left corner of the inside front panel.
2 Slide the MODE switch to
the left or right to make the
desired operation mode
setting.
For details about operation
modes and their uses, see pages
8 and 9.
3 Press RESET using a ballpoint pen or
similar object.
4 Replace the front panel by pressing it
gently onto the main unit until it clicks
into place.
CAUTION
M
O
D
E
IN
P
U
T
S
E
N
S
E
A
B
C
MCX-CA15
SW OUT
VIDEO OUT
IR/CTRL
STA
TUS
DC IN 1
2
V
AUDIO OUT
AUDIO IN
RESET
MODE
ABC
MODE
ABC
M
O
D
E
IN
P
U
T
S
EN
S
E
AB
C
MCX-CA15
SW OUT
VIDEO OUT
IR/CTRL
S
TATU S
DC IN 12V
AUDIO OUT
AUDIO IN
RESET
00_MCX-CA15_Owners_UB.book Page 10 Friday, April 30, 2004 10:53 AM