Filter
Top Products
58
SET MENU
For COAXIAL INPUT jacks 5 and 6
Choices: CD, V-AUX, DTV/CBL, VCR 1, MD/CD-R,
DVD, DVR/VCR2
• You cannot select a specific item more than once for the same
type of jack.
• When you connect a component to both the COAXIAL and
OPTICAL jacks, priority is given to the input signals from the
COAXIAL jack.
■ Input mode B)INPUT MODE
Use this feature to designate the input mode for sources
connected to the DIGITAL INPUT jacks when you turn on
this unit (see page 36 for details about the input mode).
Choices: AUTO, LAST
• Select AUTO to allow this unit to automatically detect
the type of input signal and select the appropriate input
mode.
• Select LAST to set this unit to automatically select the
last input mode used for that source.
Even if LAST is selected, the last setting for the EX/ES button
will not be recalled.
Use to adjust the optional system parameters.
■ Display set A)DISPLAY SET
Dimmer DIMMER
Use to adjust the brightness of the front panel display.
Choices: –4 to 0
Video conversion V CONV.
Use this feature to turn on/off conversion of composite
(VIDEO) signals to S-Video signals. This allows you to
output converted video signals from the S VIDEO jacks
when no S-Video signals are input.
Choices: ON, OFF
• Select OFF not to convert any signals.
• Select ON to convert composite signals to S-Video
signals.
Converted video signals are only output to the MONITOR OUT
jacks. When recording you must make the same type of video
connections (i.e., S-Video) between each component.
OSD shift OSD SHIFT
Use to adjust the vertical position of the OSD.
Choices: +5 (downward) to –5 (upward)
• Press + to lower the position of the OSD.
• Press – to raise the position of the OSD.
Gray back GRAY BACK
Selecting AUTO for the on-screen display setting displays
a gray background when there’s no video signal input.
Nothing is displayed if OFF is selected.
Choices: AUTO, OFF
If “GRAY BACK” is set to OFF, no information will be
displayed on the screen when video signals are not being input.
Notes
Note
.(5);;;;; CD
(CD)
(6);;;;; DVD
(DVD )
COAXIAL
IN
)AUTOLAST
[<]/[>]:Select
[SELECT]:Return
B)INPUT
MODE
3 OPTION MENU
Note
Note
.A)DISPLAYSET
B)MEMORYGUARD
C)PARAM.INI
D)ZONESET
[]/[]:Up/Down
[SELECT]:Enter
3
OPTION
MENU1/2
p
p
.DIMMER;;;;;;;;;0
VCONV;;;;;;;;ON
OSDSHIFT;;;;;;0
GRAYBACK;;;AUTO
[]/[]:Up/Down
[<]/[>]:sELECT
A)DISPLAY
SET
p
p
00_HTR-5760_U_EN.book Page 58 Tuesday, February 17, 2004 10:47 AM