Filter
Top Products
40
TUNING
3 Press and hold MEMORY (MAN’L/AUTO FM)
for more than 3 seconds.
The preset number, the MEMORY and AUTO
indicators flash. After about 5 seconds, automatic
presetting starts from the frequency currently
displayed and proceeds toward the higher
frequencies.
When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.
• Any stored station data existing under a preset number is
cleared when you store a new station under that preset number.
• If the number of the received stations does not reach 40 (E8),
automatic preset tuning has automatically stopped after
searching all stations.
• Only FM stations with sufficient signal strength are stored
automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually,
and store it by following the procedure in “Manually presetting
stations”.
Automatic preset tuning options
You can select the preset number from which this unit will
store FM stations and/or begin tuning toward lower
frequencies.
After pressing MEMORY in step 3:
1 Press A/B/C/D/E, then PRESET/TUNING l / h to
select the preset number under which the first station
will be stored. Automatic preset tuning will stop when
stations have all been stored up to E8.
2 Press PRESET/TUNING (EDIT) to turn off the colon
(:) and then press PRESET/TUNING l to begin
tuning toward the lower frequencies.
■ Manually presetting stations
You can also store up to 40 stations (8 stations in 5 groups,
A1 through E8) manually.
1 Tune into a station.
See page 38 for tuning instructions.
When tuned into a station, the front panel display
shows the frequency of the station received.
2 Press MEMORY (MAN’L/AUTO FM).
The MEMORY indicator flashes for about 5 seconds.
3 Press A/B/C/D/E repeatedly to select a preset
station group (A to E) while the MEMORY
indicator is flashing.
The group letter appears. Check that the colon (:)
appears in the front panel display.
Notes
Memory back-up
The memory back-up circuit prevents the stored data
from being lost even if this unit is set in the standby
mode, the power cord is disconnected from the AC
outlet, or the power supply is temporarily cut due to
power failure. However, if the power is cut for more
than one week, the preset stations may be cleared. If
so, store the stations again by using the presetting
station methods.
MAN'L/AUTO FM
MEMORY
CDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR-1
DVR/VCR2
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
A1 1:FM187.5k MHz
VOLUME
AUTO/MAN'L MONOMAN'L/AUTO FMLEVELNEXTEDIT
EFFECT
MEMORY
FM/AMPRESET/TUNING
A/B/C/D/E
PROGRAM
l
PRESET/TUNING
h
TUNING MODE
INPUT MODE
STRAIGHT
SPEAKERSPHONES
SILENT CINEMA
STANDBY
/ON
BA
MULTI CH
INPUT
INPUT
TONE CONTROL
OPTIMIZER
MIC
S VIDEO VIDEO OPTICALL AUDIO R
VIDEO AUX
43 2,5
(U.S.A. model)
CDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR-1
DVR/VCR2
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
A11:AM18630kkHz
MAN'L/AUTO FM
MEMORY
MEMORY
Flashes
NEXT
A/B/C/D/E
CDTUNER
MD/CD-R
DVD
HiFi DSP
DTV/CBL
V-AUXVCR-1
DVR/VCR2
96
24
q
PL
q
EX
MATRIX DISCRETE
SILENT CINEMA NIGHT
ZONE2
PTY HOLD AUTO
PS RT CT EONPTY
TUNED STEREO MUTE
VOLUME
MEMORY
SLEEP
VIRTUAL
PCM
q
PL
q
PL x
A B
SP
ft
mS
dB
dB
96/24
LFE
L C R
SL SB SR
q
DIGITAL
t
C11:AM18630kkHz
Preset group
00_HTR-5760_U_EN.book Page 40 Tuesday, February 17, 2004 10:47 AM