Filter
Top Products
13
English
– Adv. Picture Options (on COMPO-
NENT 480p VIDEO OUT only)
● DCDi - can be set to On (Y) or Off (N).
● True Life - produces a more dynamic picture by
increasing the picture contrast and the color
intensity.
– P-Scan Aspect Ratio (on COMPO-
NENT 480p VIDEO OUT only)
No linear stretch: for display of 4:3 image on 16:9
TV with non-linear stretching (center portion of
screen is stretch less than the side).
4:3 Pillar box: for display of 4:3 image on 16:9 TV
without stretching.
Off: No aspect ration adjustment
– TV System (NTSC/PAL Conversion)
Allows you to select between PAL, NTSC and
AUTO mode depending on your TV.
The conversions supported are as follows:
1 In the Personal Preferences Menu, select TV
System.
2 Press 3 or 4 to select PAL, NTSC or AUTO.
Notes:
– If you have a PAL only TV, ensure that your TV
System setting is PAL.
– AUTO can only be selected when using a TV that
supports both the NTSC and PAL systems
(multisystems).
– This setting is applicable for CVBS output on cinch
only.
– Slight picture distortions may occur due to this
conversion. This is normal. Thus, the AUTO format
is most suitable for the best picture quality.
Sound
– Digital output
● Digital output selection enables you to specify the
type of digital output suitable for your receiver.
● Select ALL (default setting), if you had connected
your DIGITAL AUDIO OUT to a multichanel
decoder receiver.
● Select PCM only if your receiver is not capable of
decoding compressed/encoded input stream.
● Select OFF to deactivate the DIGITAL AUDIO
OUT.
Note:
– Digital output is not available for SACD and MP3
discs.
– Analog output
Select Stereo, Dolby Surround-compatible, 3D
Sound or Multi-channel. Factory setting is Multi-
channel.
Multi-channel: Select this setting when using a
multi-channel audio/(video) receiver with 6
channel inputs. In this mode, the player will
perform DTS decoding or Dolby Digital 5.1-
channel decoding when applicable, and Dolby Pro
Logic decoding on DVD-Video and Video-CD
discs with 2-channel sound tracks. No Dolby Pro
Logic decoding is done with (Super) Audio CD
discs.
Stereo: In this setting, the 5.1 audio channels are
down-mixed to a stereo signal. Select this setting
when connecting to a TV, stereo amplifier/
receiver, etc.
NTSC
PAL60
NTSC
Not
Supported
PAL
PAL
NTSC
PAL60
NTSC
NTSC
PAL
PAL
Disc
Output format
Type
DVD
VCD
NTSC
Format
Selected mode
PAL
NTSC
PAL
NTSC
PAL
AUTO
1en1en 1 2
Digital output
Analog output
Night mode
All
PCM only
Off
Preparation