Filter
Top Products
E-15
EnglishBASIC OPERATION
ADVANCED OPERA
TION APPENDIX
INTRODUCTION
PREPARATION
TIME
/
LEVEL
5 Press TIME/LEVEL
repeatedly to select the
speaker to be adjusted.
“CENTER”, “R SUR.” or
“L SUR.” appears on the
display.
6 Press h to raise and l to
lower the level.
• Adjust the sound output
levels of the center speaker
and the rear speakers so that
they become almost the same
as that of the main speakers.
• While adjusting, the test tone
is heard from the selected
speaker.
7 When the adjustment is complete, press TEST.
“TEST OFF” appears on the display and the test tone
stops.
Note
• If “CENTER SP” on the SET MENU is set to the NONE position,
the sound output level of the center speaker cannot be adjusted in
step 6. The center channel sound is automatically output from the
right and left main speakers.
y
• Once you have completed the adjustments, you can only adjust
the overall volume level of your audio system by using VOLUME
(or VOLUME +/–).
• If there is insufficient sound output from the center and rear
speakers, you may decrease the main speaker output level by
setting “MAIN LVL” on the SET MENU to “–10 dB”. (Refer to
page 27 for details.)
DSP
TEST
ADJUSTING THE SPEAKER BALANCE
103.E800_07-15(Eng) 5/18/0, 1:37 PM15