Filter
Top Products
Chapter 3 - Installing the Yamaha CRW4416SX Drive
9
Cable Connection
Power cable
Insert the power cable securely to the “AC IN” connector on the rear
panel.
SCSI cable
Connect the SCSI cable to either of the CRW4416SX rear panel SCSI
connectors (1) or (2), and connect the other end of the SCSI cable to the
host computer.
The CRW4416SX is not supplied with a SCSI cable. You will need to
obtain one that will fit the drive and the host computer connectors.
AC I N
1
SCSI-1
SCSI-2
LINE OUT
CDR ID
L
R
TERMINATOR
OFF ON
AC I N
1
SCSI-1
SCSI-2
LINE OUT
CDR ID
L
R
TERMINATOR
OFF ON
To the next SCSI device: host
computer, hard disk drive, etc.