Chapter 2 - Touring Around CRW4416SX
6
7
Eject button
This button is used to open or close the tray.
8
POWER switch
This is the main power switch. Use it to power CRW4416SX on and
off. CRW4416SX and any other devices connected to the SCSI chain
must be powered on before the host computer is powered on.
Rear Panel
1 AC IN
Connect the included power cable here.
2 CDR ID
Use this switch to set a unique SCSI ID number for the CRW4416SX.
3 TERMINATOR
This switch is used to set termination. Refer to the terminator setting
section for details.
4 LINE OUT (L, R)
These jacks are used to output audio to the amplifier.
5 SCSI-1, SCSI-2
These connectors are used to connect the CRW4416SX in the SCSI
daisy chain.
4
1
2
3
AC I N
1
SCSI-1
SCSI-2
LINE OUT
CDR ID
L
R
TERMINATOR
OFF ON
5